Ñêîðîñòü ñâåòà: 0 1 2 3 4

Compression Coax Board-to-Board RF Connector Series
This coaxial connector is a surface mount device (SMD) designed to handle severe mechanical misalignment between two printed circuit boards. One side of the connector is soldered on the base circuit board surface and the other side mates directly on the opposite target board using applied spring pressure. The connector is available in four different lengths for board spacing of 4mm, 6.5mm, 10mm, and 14mm. The 6.5mm, 10mm, and 14mm are supplied in trays for easy pick-and-place compatibility, as well as a loose piece in a plastic bag. The 4mm is supplied on tape/reel or as a loose piece in a plastic bag. The connector has an operating temperature range of -40 degree C to 125 degree C, impedance of 50 Ohm, and can operate effectively at frequencies up to 6GHz. Return Loss is a minimum -20dB at frequencies up to 2.2GHz (all misalignments), tolerance against axial misalignment from the nominal misalignment from the nominal board stacking height is +/- 1.0mm for the 10mm and 14mm connector versions,
+/- 0.4mm for the 6.65mm connector, and +/- 0.3mm for the 4mm connector. Tolerance against radial misalignment is specified as
+/- 0.8mm from centerline in any direction for all four versions.

Ïîñåòèòü ñàéò "AMP": http://www.amp.com/

Ïðàéñ-ëèñò: "AMP": Ïîêàçàòü âñå ïðåäëîæåíèÿ îò äàííîãî ïîñòàâùèêà